THE BREEZAIRE PRODUCT LINE

 
 WK Series
This is the basic system of choice for standard applications ranging from under 100 to 2000 cubic feet. This system is the simplest, user-friendly and the lowest cost BREEZAIRE series. WK Series systems are compact, self-contained units. Many other companies have tried to duplicate this series with minimal success. Our performance speaks for itself.
The WK series has a mechanical thermostat and its adjustment requires a 1/4" straight type screwdriver. Adjusting is as easy as turning the adjusting screw clockwise which lowers the set point, and counter-clockwise raises it.

Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.
 
 

There are six models to choose from:

BREEZAIRE Model Enclosure Volume Electrical Dimensions (in) Weight
WK 1060 140 cu.ft. 3 Amp 14.25W x 13.25H x 16.38D 45 lb.
WK 2200 265 cu.ft. 4 Amp 14.25W x 13.25H x 16.38D 55 lb.
WK 3000 650 cu.ft. 5 Amp 14.25W x 19.75H x 21.63D 76 lb.
WK 4000 1000 cu.ft. 7 Amp 14.25W x 19.75H x 21.63D 81 lb.
WK 6000 1500 cu.ft. 9.5 Amp 16.25W x 22.00H x 22.25D 101 lb.
WK 8000 2000 cu.ft. 10 Amp 16.25W x 22.00H x 22.25D 101 lb.

Notes:

  1. All units are 115 Volt, 60 Hz.
  2. The 1060 and 2200 models are manufactured with the cold air out the front (standard) or out the top of unit (special order).
  3. All six models can be manufactured with the hot air out the rear (standard) or out the top of unit (special order).
  4. All six models come with the electric cord out the front (standard) or can be routed out the rear (special order).
  5. The 3000 thru 8000 models are shipped from the factory with the unit configured with the cold air routed out the front with the option of routing the cold air out the top by the installer.

For more detailed information go to the WK Installation Instructions.
 
 WKL Series
This is the advanced system of choice for standard applications ranging from under 100 to 2000 cubic feet. WKL Series systems are compact, self-contained units. Our performance speaks for itself. This series is equipped with the BREEZAIRE's affordable Sentry III control system. This system offers more features that others offer in their higher-grade models.
 
The BREEZAIRE's Sentry III control system offers the following features:
  • Large, easy to read, cool green LED display
  • Accurate, easy to adjust temperature set points with continuous display of cabinet temperature.
  • Power outage protection.
  • Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure.
  • Controls temperature by enclosure (cellar) air sensors or optional bottle probe.

Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.
 
 

There are six models to choose from:

BREEZAIRE Model Enclosure Volume Electrical Dimensions (in) Weight
WKL 1060 140 cu.ft. 3 Amp 14.25W x 13.25H x 16.38D 45 lb.
WKL 2200 265 cu.ft. 4 Amp 14.25W x 13.25H x 16.38D 55 lb.
WKL 3000 650 cu.ft. 5 Amp 14.25W x 19.75H x 21.63D 76 lb.
WKL 4000 1000 cu.ft. 7 Amp 14.25W x 19.75H x 21.63D 81 lb.
WK 6000* 1500 cu.ft. 9.5 Amp 16.25W x 22.00H x 22.25D 101 lb.
WK 8000* 2000 cu.ft. 10 Amp 16.25W x 22.00H x 22.25D 101 lb.
* Models will be available in FY2003.

Notes:

  1. All units are 115 Volt, 60 Hz.
  2. The 1060 and 2200 models are manufactured with the cold air out the front (standard) or out the top of unit (special order).
  3. All six models can be manufactured with the hot air out the rear (standard) or out the top of unit (special order).
  4. All six models come with the electric cord out the front (standard) or can be routed out the rear (special order).
  5. The 3000 thru 8000 models are shipped from the factory with the unit configured with the cold air routed out the front with the option of routing the cold air out the top by the installer.

For more detailed information go to the WKL Installation Instructions.
 
 WKE Series
Featuring the Exclusive BREEZAIRE Sentinel II Microprocessor Control System. WKE Series systems with the SENTINEL II microprocessor-based control system are the most advanced systems available on the market. No other company offers the BREEZAIRE Sentinel II performance at any price.
SENTINEL II features a separate control panel with an LCD display that can be mounted on the cabinet or in a remote location. The control panel provides a constant readout of the temperature, including a separate alarm indicator light, which allows the user to change all operating parameters at any time. Built-in diagnostic routines display trouble codes on the LCD. Optionally the system can be connected to a home alarm system.

The system also automatically controls fan speed to reduce energy use and noise while providing the optimum cooling under all conditions. WKE Series systems are compact, self-contained units.

Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.
 
 

There are four models to chose from:

BREEZAIRE Model Enclosure Volume Electrical Dimensions (in) Weight
WKE 3000 650 cu.ft. 5 Amps 14.25W x 19.75H x 21.63D 76 lb.
WKE 4000 1000 cu.ft. 7 Amps 14.25W x 19.75H x 21.63D 81 lb.
WKE 6000 1500 cu.ft. 9.5 Amps 16.25W x 22.00H x 22.25D 101 lb.
WKE 8000 2000 cu.ft. 10 Amps 16.25W x 22.00H x 22.25D 101 lb.

Notes:

  1. All units are 115 Volt, 60 Hz.
  2. All four models can be manufactured with the hot air out the rear (standard) or out the top of unit (special order).
  3. All four models come with the electric cord out the front (standard) or can be routed out the rear (special order).
  4. All four models are shipped from the factory with the unit configured with the cold air routed out the front with the option of routing the cold air out the top by the installer.
  5. All four models may be ordered with optional leads for connection to external alarm system. (special order)

For more detailed information go to the WKE Installation Instructions.
 

 WKC Series
The BREEZAIRE WKC/WKCE Series cooling units are a compact design with cold air discharge on the bottom, which makes them ideal to be installed in cabinets.

Because of their configuration the WKC/WKCE series cooling units are not rated for specified number of cubic feet. They are intended for cabinets and other constricted enclosures. Ask your BREEZAIRE Dealer for details.

The WKC cooling unit comes with two (2) optional thermostat systems. Mechanical (WKC Model) or Digital Electronic (Sentry III) (WKCE Model).

The WKC Model has a mechanical thermostat and its adjustments requires a 1/4" straight type screwdriver. Turning the adjusting screw clockwise lowers the set point, counter-clockwise raises it.
 
 
The WKCE Model has a digital electronic (Sentry III) thermostat that adds additional safety and convenience features:

 
  • Large, easy to read, green LED display.
  • Accurate, easy to adjust (no tools needed) readable set points with continuous reading of enclosure temperature or displaying of set point when changing enclosure temperatures.
  • Power outage protection, which delays unit start up after power outages.
  • Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage.
  • Controls temperature by enclosure air sensors or optional bottle probe.

 
 

Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.

There are two sizes and four models to chose from:

BREEZAIRE Model Electrical Dimensions (in) Weight
WKC 1060 3 Amp 18W x 10.5H x 16.5D 45 lb.
WKCE 1060 3 Amp 18W x 10.5H x 16.5D 45 lb.
WKC 2200 4 Amp 18W x 10.5H x 16.5D 55 lb.
WKCE 2200 4 Amp 18W x 10.5H x 16.5D 55 lb.

Notes:

  1. All units are 115 Volt, 60 Hz.
  2. All cabinet Units can be manufactured with the Hot air out the rear (standard) or out the top of unit (special order).
  3. Both cabinet models come with the electric cord out the front (standard) or can be routed out the bottom near the rear of the unit (special order).

For more detailed information go to the WKC/WKCE Installation Instructions.

 WKS Series
When our self-contained series will not meet your needs then the WKS split design will provide the flexibility needed to create an ideal installation or deal with unusual site problems. BREEZAIRE WKS Series cooling systems are special split systems that allow mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 100 feet away. The systems are designed - when installed in a properly constructed enclosure - to provide a constant selectable temperature between 48 and 63 degrees Fahrenheit while maintaining 50 to 75 percent relative humidity.
WKS Series systems are designed for easy installation by any, properly equipped, qualified air conditioning or refrigeration service technician. Two copper tubes connect the two modules and power is hard wired to the units using adequately sized 110 AC volt electrical source. These systems must be charged with refrigerant during installation. The WKS series uses BREEZAIRE's rugged adjustable mechanical thermostat.
 
 

There are two models to choose from:

BREEZAIRE Model Enclosure Volume Electrical Dimensions (in) Weight
WKS 2200 Fan/Coil 265 cu.ft. 1 Amp 22.00W x 11.00H x 8.00D 25 lb.
WKS 2200 Condenser 265 cu.ft. 4 Amps 14.00W x 10.00H x 12.00D 35 lb.
WKS 4000 Fan/Coil 1000 cu.ft. 1.5 Amps 14.25W x 19.75H x 12.38D 45 lb.
WKS 4000 Condenser 1000 cu.ft. 7.5 Amps 14.25W x 19.75H x 12.38D 55 lb.

Notes:

  1. The WKS 2200 is shipped from the factory with the unit configured with the cold air routed out the front (standard) or out the top of unit (special order).
  2. The WKS 4000 is shipped from the factory with the unit configured with the cold air routed out the front with the option of routing the cold air out the top by the installer.

For more detailed information go to the WKS 2200 Installation Instructions or the WKS 4000 Installation instructions

Copyright © 2002-2005 Breezaire Products Company. All rights reserved. BREEZAIRE Logo and Breezaire are registered trademark of Breezaire Products Company. Unauthorized reproduction, distribution, or use without the consent of Breezaire Products Company may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under California and Federal Trademark and Copyright laws.